FiberCUT® 2D

Laser Mechanisms’ FiberCUT® 2D processing head delivers cutting-edge performance for flatbed systems up to 6 kW. Featuring automatic, programmable focus with 25 mm of travel, FiberCUT® 2D is a fully-sealed, purged design that minimizes the chance of internal contamination. FiberCUT® 2D goes even further with two cover glasses; one below the focus lens, and a second below the fiber to protect collimator optics. In addition, sealed access doors prevent contamination when cover glasses are serviced.


Features
  • Internal process monitoring to detect pierce through and loss of cut
  • Internal sensors to determine the condition of all optics
  • Standard nozzle cooling and air blast
  • No exposed wires to snag or break
  • Lightweight at less than 7 kg
  • Laser Mech®’s patented height sense technology
Specifications

CUTTING HEAD
Power Rating:  up to 6 kW
Nominal Focusing Lens:  125 mm, 150 mm, 200 mm, 250 mm
Clear Aperture: 35 mm
Nozzle Orifices:  0.5 mm to 3 mm
Nozzle Styles: Single Orifice, Double, Multi-Hole Shower, Custom
Assist Gas Pressure:  up to 20 BAR
Focal Point To Nozzle Adjustment: -14 mm to +11 mm
Weight:  ~6.6 kg

LASER MECH® COLLIMATOR
Nominal Collimating Lens (Doublet, Fused Silica, λ 1025-1080 nm): 60 mm, 100 mm, 120 mm
Clear Aperture: 35 mm
Fiber Connections: QD (LLK-D, LCA), QBH (HLC-8), LLK-B (Q5)

HEIGHT SENSOR
Standoff Distance Range (1 mm Recommended):  0.2 mm to 8.0 mm
Calibration: Auto Calibrating
Response Time: Temperature Stability: ±5% of Standoff Setting, 0° to 45° C
Power Requirement: 24 V
Output (Optimized Curve For Flat Metal or Linear Signal): 0-10 V Analog

360° Viewer

Click and hold your left mouse button, then drag to rotate.

Best viewed in landscape mode on mobile devices.

Videos

Downloads

Data Sheet