Cube M

The Cube M is an advanced version of the established Cube, designed to meet the demands of high power densities in confined spaces. Remote applications up to 2 kW and measurements even in the corners of your Additive Manufacturing machine are its strengths. The unique optical front end allows measuring power densities of up to 250 kW/cm² with an angle of incidence of ± 20°. This highly sophisticated optical front end is taken into account during calibration and does therefore deliver the highest accuracy.


Request More Information

MEASUREMENT PARAMETERS
Power Range: 25 – 2,000 W1
Wavelength Range: 1030 – 1090 nm
Beam Diameter on Protective Window: 1 – 4 mm
Max. Power Density on Protective Window: 250 kW/cm²
Irradiation Time: 0.1 – 2.0 s 1 (depending on laser power)
Min. On/Off Times (Duty Cycle) for Pulsed Lasers: 50 µs (e.g. max. 10 kHz at 50% duty cycle)
Max. Laser Rise Time: < 1% of irradiation time
Energy Per Measurement: 50 – 3,000 J
Recommended Energy Per Measurement: 300 – 500 J
Total Duration Until Measurement Value Output: < 10 s
Nominal Measurement Frequency: 300 J: 1 cycle/min; 3,000 J: 1 cycle/15 min

DEVICE PARAMETERS
Max. Absorber Temperature: 120 °C
Max. Angle of Incidence (Perpendicular to Inlet Aperture): ± 20°
Max. Centered Tolerance: ± 2.0 mm
Max. Beam Divergence (Full Angle) at an angle of incidence of 0°/20°:  300 mrad/30 mrad
Accuracy: Angle of incidence up to 10°: ± 3 %; Angle of incidence from 10° to 20°: ± 5 %
Reproducibility: ± 1 %

SUPPLY DATA
Power Supply: Built-in lithium-ion battery
Temperature Range for Charging Battery: 0 – 45 °C

COMMUNICATION
Interfaces: USB / Bluetooth
Software: Cube App, LaserDiagnosticsSoftware LDS

DIMENSIONS AND WEIGHT
Dimensions (L × W × H, without connectors): 60 × 65 × 80 mm
Weight (Approx.): 800 g

1 The stated limit values are to be understood in correlation with the permitted maximum energy (E = P ∙ t).