FiberCUT® STa
Laser Mechanisms’ FiberCUT® STa laser processing head collimates and focuses a fiber-delivered laser beam and directs it, along with cutting gas, through its nozzle for optimal metal cutting. The head features programmable focus position adjustment which delivers exacting cutting in materials with varying thickness and fastest possible piercing. FiberCUT® STa’s nozzle also senses the required tip standoff from the workpiece and automatically maintains that standoff through its internal drive system.
- 3-dimensional cutting with fiber-coupled laser for 16 kg robots
- Up to 30 mm of programmable focus-to-tip adjustment
- Low moving mass minimizes inertia transfer to robot support arm
CUTTING HEAD
Power Rating: up to 6 kW
Focusing Lens (Focal Length): 104mm, 130 mm, 150 mm
Focusing Lens (Diameter): 28 mm
Clear Aperture: 25 mm
Nozzle Tip: Various Shapes
Assist Gas Pressure: up to 20 BAR
Weight: 3.8 kg
Height (Center Of Travel): 182 mm
Slide Travel: ±15 mm
Max. Travel Speed: 175 mm/sec.
Standoff Distance Range (1 mm Recommended): 0.5 mm to 2.0 mm
COLLIMATOR
Focal Lengths (Doublet, Fused Silica): 79 mm, 103 mm
Recollimating Lens (Diameter): 28 mm
Clear Aperture: 25 mm
Fiber Socket (Others Available On Request): QBH, LLK-B, QD
CONTROL BOX
Sealed Enclosure: 380 mm L x 300 mm W x 160 mm H
Single Interconnect Cable: up to 15 m long
Number of Standoff Settings: 7
Electrical Supply: 85-264 VAC, 1-Phase,47-63 Hz
Interface Inputs: 5-24 VDC, 2.2 kΩ impedance, optically isolated
Interface Outputs: 12-24 VDC, 150 mA max., sink/source, optically isolated
