FiberCUT® STx
The FiberCUT® STx robotic laser cutting head was developed by Laser Mechanisms to combine 20kW of laser power with 3D cutting applications. The STx builds on proven robotic cutting technology by adding high power features, introducing laser cutting to previously out-of-reach applications. Ultra-thick plate, structural steel, megacastings , and thick non-ferrous metals are a few of the applications taking advantage of the STx’s advanced capabilities.
- 3D cutting solution for fiber lasers
- 20kW Power Rating
- All leading fiber laser sources, wavelengths 1030-1080nm
- Adaptable to all leading laser sources up to
- Compatible with all 25kg+ industrial robots
- Low moving mass minimizes inertia transfer back to robot
CUTTING HEAD
Power Rating: up to 20 kW
Focusing Lens (Focal Length): 200 mm, 225 mm, 250 mm
Focusing Lens (Diameter): 28 mm
Clear Aperture: 25 mm
Nozzle Tip: Various Shapes
Assist Gas Pressure: up to 20 BAR
Weight: ~6 kg
Slide Travel: ±15 mm
Max. Travel Speed: 175 mm/sec.
Standoff Distance Range (1 mm Recommended): 0.5 mm to 2.0 mm
COLLIMATOR
Focal Lengths (Doublet, Fused Silica): 85 mm, 100 mm
Recollimating Lens (Diameter): 28 mm
Clear Aperture: 25 mm
Fiber Socket (Others Available On Request): QBH, QD, HLC-16, LLK-X
CONTROL BOX
Sealed Enclosure: 150 mm L x 90 mm W x 50 mm H
Single Interconnect Cable: up to 20 m long
Number of Standoff Settings: 7
Power Requirements: 24V, 4A
Interface Inputs: 24V DC, sink/source, optically isolated
Interface Outputs: 24V DC, sink/source, optically isolated